Application:
- MKP capacitor TL 507 is designed for parallel compensation of discharge lamps in demanding working conditions - harmonic distortion of the mains supply and the occurrence of accidental short-term spikes. (Capacitor is possible at lower requirements for durability and maintaining of basic electrical parameters to use as a filter or protective element in photovoltaic inverters and wind power plants, etc.)
Electrical properties for Tnom=70°C:
- Nominal capacitance: 5 ÷ 65 μF
- Tolerance of capacitance: ±5% ( J )
- Max. nominal voltage (Unom): 470V/50Hz (THD≤4%)
- Nominal voltage (Unom): 440V/50Hz (THD≤8%)
400V/50Hz (THD≤16%)
320V/50Hz (THD≤32%)
- Max. operating overvoltage – 8 hours/day: 1.1×Unom
30min/den: 1.15×Unom
1min/ den: 1.3×Unom
- Max. peak overvoltage (pulsed voltage): 2xUnom=940V/50Hz
- Test voltage between terminals: 2xUnom 50Hz / 2s.
- Test voltage terminals / case: 2000V 50Hz / 2s.
Type marking of capacitors:
Type marking of capacitors:
- J . . . single faston tag 6.3 mm, resistor
- D . . . double faston tag 6.3x0.8 mm, resistor
- I . . . . insulated solid core leads ø= 0.8, L= 120mm, resistor
Pro C>=50µF vývody Ø1,2mm,L=120mm, resistor
- L . . . insulated flexible core leads 0.75mm2, L= 120mm, resistor
Pro C>=50µF vývody S=1, 5mm2,L=120mm, resistor
- H . . . cable 2 × 0.75mm2, pro C>=50µF, kabel 2 x 1,5mm2
2nd letter indicates case fixing system:
- B . . . case without a base stud
- S . . . case with a base stud M8 x 10mm (a nut and a washer are included).
Example of making for an order:
Technical data sheetke
Application:
- MKP capacitors TC 884 are particularly designed for parallel compensation in circuits of lighting units.
Electrical properties:
- Nominal capacitance: 2 to 70 µF · Tolerance of capacitance: ±10% (K), ±5% (J)
Nominal voltage:
- Un 250 Vac 50Hz · Test voltage between terminals: 2 x Un. 50Hz / 60s
Test voltage between terminals and case:
- 2000V 50 Hz / 60s Type marking of capacitors:
1st letter indicates type of terminals.
- R . . . integrated push-wire connector with a discharging resistor.
- L . . . insulated flexible wire outlets, 0,75 mm2, lenght 120 mm, go axial through cover, discharging resistor is inside the case.
- I . . . insulated wire outlets Ø0,8 mm, lenght 120 mm, go axial through a plastic cover, discharging resistor is inside the case – another type of terminal or lenght is necessary to discuss with producer.
2nd letter indicates case fixing system.
- Q…quick fit system.
- B…case without a base stud.
- S…case with a base stud M8 x 10 mm (a nut and a washer are included).
Example of marking for an order:
- TC 884 RQ 5µF ± 10 % - lighting capacitor for paraller compensation in a quick fit case with a push-wire cover, with a discharging resistor. Capacitance is expressed in µF with tolerance ± 10%.
Technical data sheet
Application:
- MKP capacitors TC 844 are particularly designed for parallel compensation in circuits of lighting units.
Electrical properties:
- Nominal capacitance: 2 to 65 µF.
- Tolerance of capacitance: ±10% (K), ±5% (J)
Nominal voltage:
Test voltage between terminals:
- 2 x Un. 50Hz / 60s
- Test voltage between terminals and case: 2000V 50 Hz / 60s
Type marking of capacitors:
1st letter indicates type of terminals
- E…soldering tags without a discharging resistor.
- A…soldering tags with a discharging resistor.
- P…push-wire adapter with an integral discharging resistor.
2nd letter indicates case fixing system
- B…case without a base stud.
- S…case with a base stud M8 x 10mm (a nut and a washer are included).
Example of marking for an order:
TC 844 PS 5µF ±10% - lighting capacitor for parallel compensation in an aluminium case with a base stud and a push-wire adapter with an integral discharging resistor. Capacitance is expressed in µF with tolerance ±10%.
Technical data sheet
Application:
- MKP capacitors TL 201 are particularly designed for parallel compensation in circuits of lighting units.
Electrical properties:
- Nominal capacitance: 2 to 55 µF
- Tolerance of capacitance: ±10% (K), ±5% (J)
- Nominal voltage: Un 250 Vac 50Hz
- Test voltage between terminals: 2 x Un. 50Hz / 60s
- Test voltage between terminals and case: 2000V 50 Hz / 60s
Type marking of capacitors:
1st letter indicates type of terminals.
- P . . . push-wire adapter with an integral discharging resistor.
- R . . . integrated push wire connector with a discharging resistor.
- I . . . insulated wire outlets Ø 0.8mm, lenght 120mm, go axial through a plastic cover, discharging resistor is inside the case.
2nd letter indicates case fixing system
- B . . . case without a base stud
- S . . . case with a base stud M8 x 10mm (a nut and a washer are included)
Example of marking for an order:
- TL 201 RS 5µF ±10% - lighting capacitor for paraller compensation in an aluminium case with a base stud and with a push-wire cover, with an integral resistor. Capacitance is expressed in µF with tolerance ±10%.
Technical data sheet
Application:
- MKP capacitors TL 501 are particularly designed for parallel compensation in circuits of lighting units.
Electrical properties:
- Nominal capacitance: 2 to 10 µF
- Tolerance of capacitance: ±10% (K), ±5% (J), ±4%
Nominal voltage:
- Un 450 Vac 50Hz
- Test voltage between terminals: 2 x Un 50Hz / 60s
Test voltage between terminals and case:
Type marking of capacitors:
1st letter indicates type of terminals
- A . . . soldering tags with a discharging resistor.
- E . . . soldering tags without a discharging resistor.
- P . . . push wire adapter with an integral discharging resistor.
2nd letter indicates case fixing system
- B . . . case without a base stud
- S . . . case with a base stud M8 x 10mm (a nut and a washer are included) Example of marking for an order: TL 501 PS 5µF±10% - lighting capacitor for parallel compensation in an aluminium case with a base stud and with push wire adapter with an integral discharging resistor. Capacitance is expressed in µF, with tolerance ±10%.
Technical data sheet
|
